Product Overview
Quick Highlights
- Single Head Adjustable Output Pump
- Adjustable feed rate control from 5%-100% in 2.5% increments
- Self-priming up to 25 feet & does not lose prime
- Subassemblies fit together without tools for easy service or conversion
- Solutions contained in tube, not exposed to pump components or air
- Reproducible outputs within 2%
- Can pump off-gassing solutions
- Can run dry without damage
- Will not clog from dirt or debris
- Pump tubes will accept a variety of chemicals
- Pump head universal to all Stenner pumps
- 3/8 inch
- 50 gpd (189 lpd)
- Discharge pressure: 0-25 psi (0-1.7 bar)
- 120V / 60 Hz
- Amps: 1.7
- Motor: Shaded pole; 26 rpm; 1/30 HP
- Suction lift: 25' (7.6 m)
- Max operating temp: 125° F (52° C)
- Length: 10.6
- Width: 5.3
- Height: 6.0 in
- Gallons per day: 2.5 to 50
- Gallons per hour: 0.10 to 2.08
- Liters per day: 9.5 to 189.3
- Liters per hour: 0.40 to 7.89
- Ounces per minute: 0.22 to 4.44
- Milliliter per minute: 6.60 to 131.46
Technical Specs
Accessories shipped with each pump
- 3 connecting nuts 3/8"
- 2 ferrules 3/8"
- 1 injection check valve
- 1 weighted strainer
- 1 20' roll of suction/discharge tubing 3/8" white
- 1 spare pump tube
- 1 mounting bracket
- 1 installation manual
