Product Overview
Quick Highlights
- Patented, two-stage system proven to enhance filtration
- Blend of bacteria trapping chemicals
- Reduces waters turbidity and recovery time, especially during peak bather loads
- Enhances filtration down to 0.5 micron
- Traps algae, Cryptosporidium, E. coli and Giardia in the filter
- EPA tested to reduce 99.9% of Cryptosporidium from pool water
- Removes oil better than the leading enzyme products
Technical Specs
Directions:
1. Make sure the filter is clean and equipment is working properly.
2. Using a time-metered pump or by hand, add PRS Stage 1 per the recommended dosage.
3. 6 hours after adding Stage 1, add PRS Stage 2 per the recommended dosage, using a time-metered pump or by hand.
Dosage:
Stage 1: 4 oz. per 20,000 gal.
Stage 2: 4 oz. per 20,000 gal.
Frequency:
Low Bather Load: Weekly
Medium Bather Load: 2 to 4 times weekly
High Bather Load: Daily
