Product Overview
Quick Highlights
- Commercial Strength
- Removes phosphates from pool water
- Phosphates come from fertilizer, rainwater, soap & decaying plants
- Helps keep pool chemistry balanced
- Removing phosphates helps equipment run more efficiently
- Environmentally safe
- Will not harm plants or animals
- Use with SeaKlear Natural Clarifier for best results
- Old part number SKZ-U-Q
Technical Specs
Directions:
1. Clean or backwash filter.
2. Calculate the amount of product required using the dosage guide.
3. Pour SeaKlear Phosphate Remover in the pool, distributing it over as wide an area as possible.
4. Then treat with SeaKlear Natural Clarifier at a rate of 2 oz. per 5,000 gallons.
5. Run your filter system continuously for at least 24 hours.
6. If filter pressure increases 10 psi. over normal, clean or backwash the filter.
7. After 48 hours test the phosphate level with a phosphate test kit approved for swimming pool use.
8. If it is needed, reapply SeaKlear Phosphate Remover.
Note: It is normal for SeaKlear Phosphate Remover to cause pool cloudiness.
Dosage:
1 oz. per 10,000 gallons per week to maintain phosphate levels below 125 ppb.
