Product Overview
Quick Highlights
- Blue-White Industries part number F-30150P
- For horizontal flow only
- For 1.5" PVC Pipe
- Flow Range: 10 to 70 GPM (Sch 40 PVC)
- Dual GPM/LPM scale printed on both sides of the meter
- Corrosion resistant 316SS or Teflon internal float materials
- One piece machined acrylic body
- Mounts to existing pipe - No unions or adapters required
- Mounting clamps and gasket included
- Must be mounted at the vertical (twelve o'clock) position
- Must be mounted on horizontal pipe only
- The pipe must be completely full of water at all times
- The meter can accurately measure flow from one direction only
Product Description
Technical Specs
Meter Body: Cast Acrylic
Float: Standard range models = 316SS - Low range models = Teflon
Gasket: Neoprene
Pipe Clamp: 300 series Stainless Steel
Pitot screw: 1Â thru 2Â models only - 300 series stainless Steel
Pipe Requirements: IPS inch pipe size (ASTM-D-1785)
Max. Psi (bar): 150 PSI (10.3 bar) @ 70 F (21 C)
Max. fluid temp.: 190 F (88 C) @ 0 PSI
Max. ambient temp.: 14 to 110 F/ -10 to 43 C
Installation:
Minimum Straight Pipe Length Requirements - The meter's accuracy is affected by disturbances such as pumps, elbows, tees, valves, etc., in the flow stream. Install the meter in a straight run of pipe as far as possible from any disturbances. The distance required for accuracy is 10 times the nominal pipe diameter before the meter and 4 times the nominal pipe diameter after the meter.
